This PR implements some heuristics to check for breaking database changes. The goal is to prevent accidental changes to the database schema occurring without a version bump.
This bug was first found and partially fixed by @VolodymyrBg in #7317 - this PR applies the same fix everywhere else.
The old logic updated the waker when it already matched the context, and did nothing when it was stale:
```rust
if waker.will_wake(cx.waker()) {
self.waker = Some(cx.waker().clone());
}
```
This is the wrong way around. We only want to update the waker if it doesn't match the current context:
```rust
if !waker.will_wake(cx.waker()) {
self.waker = Some(cx.waker().clone());
}
```
I don't think we've ever noticed any issues, but it’s a subtle bug that could lead to missed wakeups.
N/A
For responding to by_range requests , we should ideally only respond with items in the range `req.start_slot()..req.start_slot() + req.count`.
We were not filtering the generated response for blobs and data columns, only for blocks. This PR adds the filtering for the sidecars as well.
N/A
After the electra fork which includes EIP 6110, the beacon node no longer needs the eth1 bridging mechanism to include new deposits as they are provided by the EL as a `deposit_request`. So after electra + a transition period where the finalized bridge deposits pre-fork are included through the old mechanism, we no longer need the elaborate machinery we had to get deposit contract data from the execution layer.
Since holesky has already forked to electra and completed the transition period, this PR basically checks to see if removing all the eth1 related logic leads to any surprises.
I think this should resolve#7155
This removes the level field from the instrumenting we were doing across a range of functions. The level will now default to the level of the log.
Partially https://github.com/sigp/lighthouse/issues/6291
This PR removes the reprocess event channel from being externally exposed. All work events are now sent through the single `BeaconProcessorSend` channel. I've introduced a new `Work::Reprocess` enum variant which we then use to schedule jobs for reprocess. I've also created a new scheduler module which will eventually house the different scheduler impls.
This is all needed as an initial step to generalize the beacon processor
A "full" implementation for the generalized beacon processor can be found here
https://github.com/sigp/lighthouse/pull/6448
I'm going to try to break up the full implementation into smaller PR's so it can actually be reviewed
#6970
This allows for us to receive `SingleAttestation` over gossip and process it without converting. There is still a conversion to `Attestation` as a final step in the attestation verification process, but by then the `SingleAttestation` is fully verified.
I've also fully removed the `submitPoolAttestationsV1` endpoint as its been deprecated
I've also pre-emptively deprecated supporting `Attestation` in `submitPoolAttestationsV2` endpoint. See here for more info: https://github.com/ethereum/beacon-APIs/pull/531
I tried to the minimize the diff here by only making the "required" changes. There are some unnecessary complexities with the way we manage the different attestation verification wrapper types. We could probably consolidate this to one wrapper type and refactor this even further. We could leave that to a separate PR if we feel like cleaning things up in the future.
Note that I've also updated the test harness to always submit `SingleAttestation` regardless of fork variant. I don't see a problem in that approach and it allows us to delete more code :)
Resolves#6767
This PR implements a basic version of validator custody.
- It introduces a new `CustodyContext` object which contains info regarding number of validators attached to a node and the custody count they contribute to the cgc.
- The `CustodyContext` is added in the da_checker and has methods for returning the current cgc and the number of columns to sample at head. Note that the logic for returning the cgc existed previously in the network globals.
- To estimate the number of validators attached, we use the `beacon_committee_subscriptions` endpoint. This might overestimate the number of validators actually publishing attestations from the node in the case of multi BN setups. We could also potentially use the `publish_attestations` endpoint to get a more conservative estimate at a later point.
- Anytime there's a change in the `custody_group_count` due to addition/removal of validators, the custody context should send an event on a broadcast channnel. The only subscriber for the channel exists in the network service which simply subscribes to more subnets. There can be additional subscribers in sync that will start a backfill once the cgc changes.
TODO
- [ ] **NOT REQUIRED:** Currently, the logic only handles an increase in validator count and does not handle a decrease. We should ideally unsubscribe from subnets when the cgc has decreased.
- [ ] **NOT REQUIRED:** Add a service in the `CustodyContext` that emits an event once `MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS ` passes after updating the current cgc. This event should be picked up by a subscriber which updates the enr and metadata.
- [x] Add more tests
Issue discovered on PeerDAS devnet (node `lighthouse-geth-2.peerdas-devnet-5.ethpandaops.io`). Summary:
- A lookup is created for block root `0x28299de15843970c8ea4f95f11f07f75e76a690f9a8af31d354c38505eebbe12`
- That block or a parent is faulty and `0x28299de15843970c8ea4f95f11f07f75e76a690f9a8af31d354c38505eebbe12` is added to the failed chains cache
- We later receive a block that is a child of a child of `0x28299de15843970c8ea4f95f11f07f75e76a690f9a8af31d354c38505eebbe12`
- We create a lookup, which attempts to process the child of `0x28299de15843970c8ea4f95f11f07f75e76a690f9a8af31d354c38505eebbe12` and hit a processor error `UnknownParent`, hitting this line
bf955c7543/beacon_node/network/src/sync/block_lookups/mod.rs (L686-L688)
`search_parent_of_child` does not create a parent lookup because the parent root is in the failed chain cache. However, we have **already** marked the child as awaiting the parent. This results in an inconsistent state of lookup sync, as there's a lookup awaiting a parent that doesn't exist.
Now we have a lookup (the child of `0x28299de15843970c8ea4f95f11f07f75e76a690f9a8af31d354c38505eebbe12`) that is awaiting a parent lookup that doesn't exist: hence stuck.
### Impact
This bug can affect Mainnet as well as PeerDAS devnets.
This bug may stall lookup sync for a few minutes (up to `LOOKUP_MAX_DURATION_STUCK_SECS = 15 min`) until the stuck prune routine deletes it. By that time the root will be cleared from the failed chain cache and sync should succeed. During that time the user will see a lot of `WARN` logs when attempting to add each peer to the inconsistent lookup. We may also sync the block through range sync if we fall behind by more than 2 epochs. We may also create the parent lookup successfully after the failed cache clears and complete the child lookup.
This bug is triggered if:
- We have a lookup that fails and its root is added to the failed chain cache (much more likely to happen in PeerDAS networks)
- We receive a block that builds on a child of the block added to the failed chain cache
Ensure that we never create (or leave existing) a lookup that references a non-existing parent.
I added `must_use` lints to the functions that create lookups. To fix the specific bug we must recursively drop the child lookup if the parent is not created. So if `search_parent_of_child` returns `false` now return `LookupRequestError::Failed` instead of `LookupResult::Pending`.
As a bonus I have a added more logging and reason strings to the errors
Partly addresses:
- https://github.com/sigp/lighthouse/issues/7379
Handle attestation validation errors from `get_attesting_indices` to prevent an error log, downscore the peer, and reject the message.
#7461 and partly #6439.
Desired behaviour after receiving `engine_getBlobs` response:
1. Gossip verify the blobs and proofs, but don't mark them as observed yet. This is because not all blobs are published immediately (due to staggered publishing). If we mark them as observed and not publish them, we could end up blocking the gossip propagation.
2. Blobs are marked as observed _either_ when:
* They are received from gossip and forwarded to the network .
* They are published by the node.
Current behaviour:
- ❗ We only gossip verify `engine_getBlobsV1` responses, but not `engine_getBlobsV2` responses (PeerDAS).
- ❗ After importing EL blobs AND before they're published, if the same blobs arrive via gossip, they will get re-processed, which may result in a re-import.
1. Perform gossip verification on data columns computed from EL `getBlobsV2` response. We currently only do this for `getBlobsV1` to prevent importing blobs with invalid proofs into the `DataAvailabilityChecker`, this should be done on V2 responses too.
2. Add additional gossip verification to make sure we don't re-process a ~~blob~~ or data column that was imported via the EL `getBlobs` but not yet "seen" on the gossip network. If an "unobserved" gossip blob is found in the availability cache, then we know it has passed verification so we can immediately propagate the `ACCEPT` result and forward it to the network, but without re-processing it.
**UPDATE:** I've left blobs out for the second change mentioned above, as the likelihood and impact is very slow and we haven't seen it enough, but under PeerDAS this issue is a regular occurrence and we do see the same block getting imported many times.
Fix clippy lints for `rustc` 1.87
clippy complains about `BeaconChainError` being too large. I went on a bit of a boxing spree because of this. We may instead want to `Box` some of the `BeaconChainError` variants?
Closes https://github.com/sigp/lighthouse/issues/6895
We need sync to retry custody requests when a peer CGC updates. A higher CGC can result in a data column subnet peer count increasing from 0 to 1, allowing requests to happen.
Add new sync event `SyncMessage::UpdatedPeerCgc`. It's sent by the router when a metadata response updates the known CGC
Don't publish data columns reconstructed from RPC columns to the gossip network, as this may result in peer downscoring if we're sending columns from past slots.
- Re-opens https://github.com/sigp/lighthouse/pull/6864 targeting unstable
Range sync and backfill sync still assume that each batch request is done by a single peer. This assumption breaks with PeerDAS, where we request custody columns to N peers.
Issues with current unstable:
- Peer prioritization counts batch requests per peer. This accounting is broken now, data columns by range request are not accounted
- Peer selection for data columns by range ignores the set of peers on a syncing chain, instead draws from the global pool of peers
- The implementation is very strict when we have no peers to request from. After PeerDAS this case is very common and we want to be flexible or easy and handle that case better than just hard failing everything.
- [x] Upstream peer prioritization to the network context, it knows exactly how many active requests a peer (including columns by range)
- [x] Upstream peer selection to the network context, now `block_components_by_range_request` gets a set of peers to choose from instead of a single peer. If it can't find a peer, it returns the error `RpcRequestSendError::NoPeer`
- [ ] Range sync and backfill sync handle `RpcRequestSendError::NoPeer` explicitly
- [ ] Range sync: leaves the batch in `AwaitingDownload` state and does nothing. **TODO**: we should have some mechanism to fail the chain if it's stale for too long - **EDIT**: Not done in this PR
- [x] Backfill sync: pauses the sync until another peer joins - **EDIT**: Same logic as unstable
### TODOs
- [ ] Add tests :)
- [x] Manually test backfill sync
Note: this touches the mainnet path!
Debugging an sync issue from @pawanjay176 I'm missing some key info where instead of logging the ID of the SyncingChain we just log "Finalized" (the sync type). This looks like some typo or something was lost in translation when refactoring things.
```
Apr 17 12:12:00.707 DEBUG Syncing new finalized chain chain: Finalized, component: "range_sync"
```
This log should include more info about the new chain but just logs "Finalized"
```
Apr 17 12:12:00.810 DEBUG New chain added to sync peer_id: "16Uiu2HAmHP8QLYQJwZ4cjMUEyRgxzpkJF87qPgNecLTpUdruYbdA", sync_type: Finalized, new_chain: Finalized, component: "range_sync"
```
- Remove the Display impl and log the ID explicitly for all logs.
- Log more details when creating a new SyncingChain
#6296: Deterministic RNG in peer DAS publish block tests
Made test functions to call publish-block APIs with true for the deterministic RNG boolean parameter while production code with false. This will deterministically shuffle columns for unit tests under broadcast_validation_tests.rs.
Previously only supernode contributes to data column publishing in Lighthouse.
Recently we've [updated the spec](https://github.com/ethereum/consensus-specs/pull/4183) to have full nodes publishing data columns as well, to ensure all nodes contributes to propagation.
This also prevents already imported data columns from being imported again (because we don't "observe" them), and ensures columns that are observed in the [gossip seen cache](d60c24ef1c/beacon_node/beacon_chain/src/data_column_verification.rs (L492)) are forwarded to its peers, rather than being ignored.
Partially #6989.
This PR adds the missing error log when a batch fails due to issues with converting the response into `RpcBlock`. See the above linked issue for more details.
Adding this log reveals that we're completing range requests with missing columns, hence causing the batch to fail. It looks like we've hit the case where we've received enough stream terminations, but not all columns are returned.
```
Feb 12 06:12:16.558 DEBG Failed to convert range block components into RpcBlock, error: No column for block 0xc5b6c7fa02f5ef603d45819c08c6519f1dba661fd5d44a2fc849d3e7028b6007 index 18, id: 3456/RangeSync/116/3432, service: sync, module: network::sync::network_context:488
```
I've also removed some redundant `id` logging, as the `id` debug representation is difficult to read, and is now being logged as part of `req_id` in a more succinct format (relevant PR: #6914)
I've been working at updating another library to latest Lighthouse and got very confused with RPC request Ids.
There were types that had fields called `request_id` and `id`. And interchangeably could have types `PeerRequestId`, `rpc::RequestId`, `AppRequestId`, `api_types::RequestId` or even `Request.id`.
I couldn't keep track of which Id was linked to what and what each type meant.
So this PR mainly does a few things:
- Changes the field naming to match the actual type. So any field that has an `AppRequestId` will be named `app_request_id` rather than `id` or `request_id` for example.
- I simplified the types. I removed the two different `RequestId` types (one in Lighthouse_network the other in the rpc) and grouped them into one. It has one downside tho. I had to add a few unreachable lines of code in the beacon processor, which the extra type would prevent, but I feel like it might be worth it. Happy to add an extra type to avoid those few lines.
- I also removed the concept of `PeerRequestId` which sometimes went alongside a `request_id`. There were times were had a `PeerRequest` and a `Request` being returned, both of which contain a `RequestId` so we had redundant information. I've simplified the logic by removing `PeerRequestId` and made a `ResponseId`. I think if you look at the code changes, it simplifies things a bit and removes the redundant extra info.
I think with this PR things are a little bit easier to reasonable about what is going on with all these RPC Ids.
NOTE: I did this with the help of AI, so probably should be checked
N/A
Adds endpoints to add and remove trusted peers from the http api. The added peers are trusted peers so they won't be disconnected for bad scores. We try to maintain a connection to the peer in case they disconnect from us by trying to dial it every heartbeat.
- Part of https://github.com/sigp/lighthouse/issues/6767
Validator custody makes the CGC and set of sampling columns dynamic. Right now this information is stored twice:
- in the data availability checker
- in the network globals
If that state becomes dynamic we must make sure it is in sync updating it twice, or guarding it behind a mutex. However, I noted that we don't really have to keep the CGC inside the data availability checker. All consumers can actually read it from the network globals, and we can update `make_available` to read the expected count of data columns from the block.
Part of
- https://github.com/sigp/lighthouse/issues/6258
`RangeBlockComponentsRequest` handles a set of by_range requests. It's quite lose on these requests, not tracking them by ID. We want to implement individual request retries, so we must make `RangeBlockComponentsRequest` aware of its requests IDs. We don't want the result of a prior by_range request to affect the state of a future retry. Lookup sync uses this mechanism.
Now `RangeBlockComponentsRequest` tracks:
```rust
pub struct RangeBlockComponentsRequest<E: EthSpec> {
blocks_request: ByRangeRequest<BlocksByRangeRequestId, Vec<Arc<SignedBeaconBlock<E>>>>,
block_data_request: RangeBlockDataRequest<E>,
}
enum RangeBlockDataRequest<E: EthSpec> {
NoData,
Blobs(ByRangeRequest<BlobsByRangeRequestId, Vec<Arc<BlobSidecar<E>>>>),
DataColumns {
requests: HashMap<
DataColumnsByRangeRequestId,
ByRangeRequest<DataColumnsByRangeRequestId, DataColumnSidecarList<E>>,
>,
expected_custody_columns: Vec<ColumnIndex>,
},
}
enum ByRangeRequest<I: PartialEq + std::fmt::Display, T> {
Active(I),
Complete(T),
}
```
I have merged `is_finished` and `Into_responses` into the same function. Otherwise, we need to duplicate the logic to figure out if the requests are done.
I feel it's preferable to do this explicitly by updating the revision on `Cargo.toml` rather than implicitly by letting `Cargo.lock` control the revision of the branch.
