- #6452 (partially)
Remove dependencies on `store` and `lighthouse_network` from `eth2`. This was achieved as follows:
- depend on `enr` and `multiaddr` directly instead of using `lighthouse_network`'s reexports.
- make `lighthouse_network` responsible for converting between API and internal types.
- in two cases, remove complex internal types and use the generic `serde_json::Value` instead - this is not ideal, but should be fine for now, as this affects two internal non-spec endpoints which are meant for debugging, unstable, and subject to change without notice anyway. Inspired by #6679. The alternative is to move all relevant types to `eth2` or `types` instead - what do you think?
NA
Bumps the `ethereum_ssz` version, along with other crates that share the dep.
Primarily, this give us bitfields which can store 128 bytes on the stack before allocating, rather than 32 bytes (https://github.com/sigp/ethereum_ssz/pull/38). The validator count has increase massively since we set it at 32 bytes, so aggregation bitfields (et al) now require a heap allocation. This new value of 128 should get us to ~2m active validators.
This change makes the `total_difficulty` field in `ExecutionBlock` an `Option<Uint256>` since newer clients are no longer including the `totalDifficulty` field.
I think this will fix https://github.com/sigp/lighthouse/issues/6937 but I was actually more focused on the builder registration case described below.
In our [builder-playground](https://github.com/flashbots/builder-playground) we setup a local devnet using lighthouse, reth, and mev-boost-relay. After upgrading to reth 1.2.0 and lighthouse v7.0.0.beta.0 for Pectra, we noticed that the validator registration process was _sometimes_ failing with:
```
Feb 25 23:35:25.038 ERRO Unable to publish proposer preparation to all beacon nodes, error: Some endpoints failed, num_failed: 1 http://localhost:3500/ => RequestFailed(ServerMessage(ErrorMessage { code: 400, message: "BAD_REQUEST: error updating proposer preparations: ForkchoiceUpdate(EngineError(Api { error: Json(Error(\"missing field `totalDifficulty`\", line: 0, column: 0)) }))", stacktraces: [] })), service: preparation
Feb 25 23:35:25.099 WARN Unable to publish validator registrations to the builder network, error: Some endpoints failed, num_failed: 1 http://localhost:3500/ => RequestFailed(ServerMessage(ErrorMessage { code: 400, message: "BAD_REQUEST: error updating proposer preparations: ForkchoiceUpdate(EngineError(Api { error: Json(Error(\"missing field `totalDifficulty`\", line: 0, column: 0)) }))", stacktraces: [] })), service: preparation
```
What was even more confusing, was that it was sometimes working, which actually led to a wild goose chase thinking it was a networking issue. However, when tracing through the LH code, I came across this comment:
70194dfc6a/beacon_node/beacon_chain/src/beacon_chain.rs (L6048-L6049)
This explained why it sometimes worked, in our playground we run lighthouse with `--prepare-payload-lookahead 8000` thus there was always a 4-second window where the call wasn't made.
But, if the call was made, then this code would 100% fail with updated reth:
https://github.com/sigp/lighthouse/blob/unstable/beacon_node/execution_layer/src/lib.rs#L1688-L1692
Which would then mapped to a `Error::ForkchoiceUpdate` in `update_execution_engine_forkchoice`.
Anyways, the fix was to make `total_difficulty` Optional, and then to update any code paths where it was used. In doing so, I assume that if the EL doesn't include total difficulty then the chain is already post-merge.
PeerDAS has undergone multiple refactors + the blending with the get_blobs optimization has generated technical debt.
A function signature like this
f008b84079/beacon_node/beacon_chain/src/beacon_chain.rs (L7171-L7178)
Allows at least the following combination of states:
- blobs: Some / None
- data_columns: Some / None
- data_column_recv: Some / None
- Block has data? Yes / No
- Block post-PeerDAS? Yes / No
In reality, we don't have that many possible states, only:
- `NoData`: pre-deneb, pre-PeerDAS with 0 blobs or post-PeerDAS with 0 blobs
- `Blobs(BlobSidecarList<E>)`: post-Deneb pre-PeerDAS with > 0 blobs
- `DataColumns(DataColumnSidecarList<E>)`: post-PeerDAS with > 0 blobs
- `DataColumnsRecv(oneshot::Receiver<DataColumnSidecarList<E>>)`: post-PeerDAS with > 0 blobs, but we obtained the columns via reconstruction
^ this are the variants of the new `AvailableBlockData` enum
So we go from 2^5 states to 4 well-defined. Downstream code benefits nicely from this clarity and I think it makes the whole feature much more maintainable.
Currently `is_available` returns a bool, and then we construct the available block in `make_available`. In a way the availability condition is duplicated in both functions. Instead, this PR constructs `AvailableBlockData` in `is_available` so the availability conditions are written once
```rust
if let Some(block_data) = is_available(..) {
let available_block = make_available(block_data);
}
```
Resolves https://github.com/sigp/lighthouse/issues/7000
Set the accept header on builder to the correct value when requesting ssz.
This PR also adds a flag to disable ssz over the builder api altogether. In the case that builders/relays have an ssz bug, we can react quickly by asking clients to restart their nodes with the `--disable-ssz-builder` flag to force json. I'm not fully convinced if this is useful so open to removing it or opening another PR for it.
Testing this currently.
N/A
2 changes:
1. Replace Option::map_or(true, ...) with is_none_or(...)
2. Remove unnecessary `Into::into` blocks where the type conversion is apparent from the types
Closes:
- https://github.com/sigp/lighthouse/issues/6818
Use `MAX_EFFECTIVE_BALANCE_ELECTRA` (2048) for attestation reward calculations involving Electra.
Add a new `InteropGenesisBuilder` that tries to provide a more flexible way to build genesis states. Unfortunately due to lifetime jank, it is quite unergonomic at present. We may want to refactor this builder in future to make it easier to use.
Closes
- https://github.com/sigp/lighthouse/issues/6805
- Use a new `WorkEvent::GossipAttestationToConvert` to handle the conversion from `SingleAttestation` to `Attestation` _on_ the beacon processor (prevents a Tokio thread being blocked).
- Improve the error handling for single attestations. I think previously we had no ability to reprocess single attestations for unknown blocks -- we would just error. This seemed to be the case in both gossip processing and processing of `SingleAttestation`s from the HTTP API.
- Move the `SingleAttestation -> Attestation` conversion function into `beacon_chain` so that it can return the `attestation_verification::Error` type, which has well-defined error handling and peer penalties. The now-unused variants of `types::Attestation::Error` have been removed.
Fix another issue with fetch-blobs, similar to:
- https://github.com/sigp/lighthouse/pull/6911
Check if the list of blobs returned is all `None`, and if so, do not proceed any further.
This prevents an ugly error like:
> Feb 03 17:32:12.384 ERRO Error fetching or processing blobs from EL, block_root: 0x7326fe2dc1cb9036c9de7a07a662c86a339085597849016eadf061b70b7815ba, error: BlobProcessingError(AvailabilityCheck(Unexpected)), module
: network::network_beacon_processor:1011
- #6510
- Keep execution payload during historical backfill when `--prune-payloads false` is set
- Add a field in the historical backfill debug log to indicate if execution payload is kept
- Add a test to check historical blocks has execution payload when `--prune-payloads false is set
- Very minor typo correction that I notice when working on this
Resolve a `TODO(das)` to use KZG batch verification in `put_rpc_custody_columns`
Uses `verify_kzg_for_data_column_list_with_scoring` in all paths that send more than one column. To use batch verification and have attributability of which peer is sending a bad column.
Needs to move `verify_kzg_for_data_column_list_with_scoring` into the type's module to convert to the KZG verified type.
Addresses #6026.
Post-PeerDAS the DB expects to have data columns for the finalized block.
Instead of forcing the user to submit the columns, this PR computes the columns from the blobs that we can already fetch from the checkpointz server or with the existing CLI options.
Note 1: (EDIT) Pruning concern addressed
Note 2: I have not tested this feature
Note 3: @michaelsproul an alternative I recall is to not require the blobs / columns at this point and expect backfill to populate the finalized block
Addresses #6706
This PR activates PeerDAS at the Fulu fork epoch instead of `EIP_7594_FORK_EPOCH`. This means we no longer support testing PeerDAS with Deneb / Electrs, as it's now part of a hard fork.
Complements
- https://github.com/sigp/lighthouse/pull/6321
by detecting if the proposer signature is valid or not during RPC block processing. In lookup sync, if the invalid signature signature is the proposer signature, it's not deterministic on the block root. So we should only penalize the sending peer and retry. Otherwise, if it's on the body we should drop the lookup and penalize all peers that claim to have imported the block
* Fix data columns not persisting for PeerDAS due to a `getBlobs` race condition.
* Refactor blobs and columns logic in `chain.import_block` for clarity. Add more docs on `data_column_recv`.
* Add more code comments for clarity.
* Merge remote-tracking branch 'origin/unstable' into fix-column-race
# Conflicts:
# beacon_node/beacon_chain/src/block_verification_types.rs
# beacon_node/beacon_chain/src/data_availability_checker/overflow_lru_cache.rs
* Fix lint.
* First pass
* Add restrictions to RuntimeVariableList api
* Use empty_uninitialized and fix warnings
* Fix some todos
* Merge branch 'unstable' into max-blobs-preset
* Fix take impl on RuntimeFixedList
* cleanup
* Fix test compilations
* Fix some more tests
* Fix test from unstable
* Merge branch 'unstable' into max-blobs-preset
* Merge remote-tracking branch 'origin/unstable' into max-blobs-preset
* Remove footgun function
* Minor simplifications
* Move from preset to config
* Fix typo
* Revert "Remove footgun function"
This reverts commit de01f923c7.
* Try fixing tests
* Thread through ChainSpec
* Fix release tests
* Move RuntimeFixedVector into module and rename
* Add test
* Remove empty RuntimeVarList awefullness
* Fix tests
* Simplify BlobSidecarListFromRoot
* Merge remote-tracking branch 'origin/unstable' into max-blobs-preset
* Bump quota to account for new target (6)
* Remove clone
* Fix issue from review
* Try to remove ugliness
* Merge branch 'unstable' into max-blobs-preset
* Fix max value
* Fix doctest
* Fix formatting
* Fix max check
* Delete hardcoded max_blobs_per_block in RPC limits
* Merge remote-tracking branch 'origin/unstable' into max-blobs-preset
* Use reqwest eventsource for get_events api
* await for Event::Open before returning stream
* fmt
* Merge branch 'unstable' into sse-client-fix
* Ignore lint
