N/A
After the electra fork which includes EIP 6110, the beacon node no longer needs the eth1 bridging mechanism to include new deposits as they are provided by the EL as a `deposit_request`. So after electra + a transition period where the finalized bridge deposits pre-fork are included through the old mechanism, we no longer need the elaborate machinery we had to get deposit contract data from the execution layer.
Since holesky has already forked to electra and completed the transition period, this PR basically checks to see if removing all the eth1 related logic leads to any surprises.
Resolves#6767
This PR implements a basic version of validator custody.
- It introduces a new `CustodyContext` object which contains info regarding number of validators attached to a node and the custody count they contribute to the cgc.
- The `CustodyContext` is added in the da_checker and has methods for returning the current cgc and the number of columns to sample at head. Note that the logic for returning the cgc existed previously in the network globals.
- To estimate the number of validators attached, we use the `beacon_committee_subscriptions` endpoint. This might overestimate the number of validators actually publishing attestations from the node in the case of multi BN setups. We could also potentially use the `publish_attestations` endpoint to get a more conservative estimate at a later point.
- Anytime there's a change in the `custody_group_count` due to addition/removal of validators, the custody context should send an event on a broadcast channnel. The only subscriber for the channel exists in the network service which simply subscribes to more subnets. There can be additional subscribers in sync that will start a backfill once the cgc changes.
TODO
- [ ] **NOT REQUIRED:** Currently, the logic only handles an increase in validator count and does not handle a decrease. We should ideally unsubscribe from subnets when the cgc has decreased.
- [ ] **NOT REQUIRED:** Add a service in the `CustodyContext` that emits an event once `MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS ` passes after updating the current cgc. This event should be picked up by a subscriber which updates the enr and metadata.
- [x] Add more tests
Our basic sim test has been [flaky](https://github.com/sigp/lighthouse/actions/runs/15458818777/job/43515966229) for some time, and seems like it has gotten worse since electra fork was added to it in #7199.
It looks like the github runner is struggling with the load, currently it runs 7 nodes on a 4 CPU runner, which is definitely too much. We could consider moving this to run on our self hosted runner - but I think running 7 nodes is unnecessary and we can probably trim test this down.
Reduce number of basic sim test nodes from 7 (3 BN + 3 Proposer BN + 1 extra) to 4 (2 BN + 1 Proposer BN + 1 extra).
If we want to run more nodes, we'd have to consider running on self hosted runners.
This PR adds the ability to download [nightly reference tests from the consensus-specs repo](https://github.com/ethereum/consensus-specs/actions/workflows/generate_vectors.yml). This will be used by spec maintainers to ensure that there are no unexpected test failures prior to new releases. Also, we will keep track of test compliance with [this website](https://jtraglia.github.io/nyx/); eventually this will be integrated into Hive.
* A new script (`download_test_vectors.sh`) is added to handle downloads.
* The logic for downloading GitHub artifacts is a bit complex.
* Rename the variables which store test versions:
* `TESTS_TAG` to `CONSENSUS_SPECS_TEST_VERSION`.
* `BLS_TEST_TAG` to `BLS_TEST_VERSION`, for consistency.
* Delete tarballs after extracting them.
* I see no need to keep these; they just use extra disk.
* Consolidate `clean` rules into a single rule.
* Do `clean` prior to downloading/extracting tests.
* Remove `CURL` variable with GitHub token; don't need it for downloading releases.
* Do `mkdir -p` when creating directories.
* Probably more small stuff...
The simulator works but always emits the following message:
```
$ cargo run --release --bin simulator basic-sim
...
...
Failed to initialize dependency logging: attempted to set a logger after the logging system was already initialized
...
...
```
This PR removes the initialization with `env_logger`.
(Update)
With https://github.com/sigp/lighthouse/pull/7433 merged, the libp2p/discv5 logs are saved in separate files and respect the `RUST_LOG` env var for log level configuration.
While the Lighthouse implementation of the `ValidatorStore` does not really care about blobs, Anchor needs to be able to return different blobs from `sign_blocks` than what was passed into it, in case it decides to sign another Anchor node's block. Only passing the unsigned block into `sign_block` and only returning a signed block from it (without any blobs and proofs) was an oversight in #6705.
- Replace `validator_store::{Uns,S}ignedBlock` with `validator_store::block_service::{Uns,S}ignedBlock`, as we need all data in there.
- In `lighthouse_validator_store`, just add the received blobs back to the signed block after signing it.
Fix clippy lints for `rustc` 1.87
clippy complains about `BeaconChainError` being too large. I went on a bit of a boxing spree because of this. We may instead want to `Box` some of the `BeaconChainError` variants?
This PR relates to:
- https://github.com/sigp/lighthouse/pull/7199
- -> workspace_filter has been enabled (dependency logging has been disabled)
- https://github.com/sigp/lighthouse/pull/7394
- -> file logging has been optionally enabled
Building on these, this PR enables dependency logging for the simulators. The logs are written to separate files.
The libp2p/discv5 logs:
- are saved to the directory specified with `--log-dir`
- respects the `RUST_LOG` environment variable for log level configuration
Beacon logs in the simulator are printed only to stdout. The logs are usually large, so persisting them would be helpful for debugging.
Added `--log-dir` parameter to the simulators and a step to upload the logs to Artifacts.
(Update)
Added `--disable-stdout-logging` to disable stdout logging, making the CI page cleaner.
This PR adds transitions to Electra ~~and Fulu~~ fork epochs in the simulator tests.
~~It also covers blob inclusion verification and data column syncing on a full node in Fulu.~~
UPDATE: Remove fulu fork from sim tests due to https://github.com/sigp/lighthouse/pull/7199#issuecomment-2852281176
- Create trait `ValidatorStore` with all functions used by the `validator_services`
- Make `validator_services` generic on `S: ValidatorStore`
- Introduce `LighthouseValidatorStore`, which has identical functionality to the old `ValidatorStore`
- Remove dependencies (especially `environment`) from `validator_services` and `beacon_node_fallback` in order to be able to cleanly use them in Anchor
#7153#7146#7147#7148 -> Thanks to @ackintosh
This PR does the following:
1. Disable logging to file when using either `--logfile-max-number 0` or `--logfile-max-size 0`. Note that disabling the log file in this way will also disable `discv5` and `libp2p` logging.
1. `discv5` and `libp2p` logging will be disabled by default unless running `beacon_node` or `boot_node`. This also should fix the VC panic we were seeing.
1. Removes log rotation and compression from `libp2p` and `discv5` logs. It is now limited to 1 file and will rotate based on the value of the `--logfile-max-size` flag. We could potentially add flags specifically to control the size/number of these, however I felt a single log file was sufficient. Perhaps @AgeManning has opinions about this?
1. Removes all dependency logging and references to `dep_log`.
1. Introduces workspace filtering to file and stdout. This explicitly allows logs from members of the Lighthouse workspace, disallowing all others. It uses a proc macro which pulls the member list from cargo metadata at compile time. This might be over-engineered but my hope is that this list will not require maintenance.
1. Unifies file and stdout JSON format. With slog, the formats were slightly different. @threehrsleep worked to maintain that format difference, to ensure there was no breaking changes. If these format differences are actually problematic we can restore it, however I felt the added complexity wasn't worth it.
1. General code improvements and cleanup.
Backport of:
- https://github.com/sigp/lighthouse/pull/7067
For:
- https://github.com/sigp/lighthouse/issues/7039
- Prevent writing to state cache when migrating the database
- Add `state-cache-headroom` flag to control pruning
- Prune old epoch boundary states ahead of mid-epoch states
- Never prune head block's state
- Avoid caching ancestor states unless they are on an epoch boundary
- Log when states enter/exit the cache
Co-authored-by: Eitan Seri-Levi <eserilev@ucsc.edu>
https://github.com/sigp/lighthouse/issues/7146
Removes `filter_layer` from the builder as this was acting as a "global minimum". We don't actually need this, since we are using more granular control in `stdout_logging_layer` and `file_logging_layer`. Removing this restores control of the logfiles level back to the `--logfile-debug-level` flag (and defaults to debug).
- #6452 (partially)
Remove dependencies on `store` and `lighthouse_network` from `eth2`. This was achieved as follows:
- depend on `enr` and `multiaddr` directly instead of using `lighthouse_network`'s reexports.
- make `lighthouse_network` responsible for converting between API and internal types.
- in two cases, remove complex internal types and use the generic `serde_json::Value` instead - this is not ideal, but should be fine for now, as this affects two internal non-spec endpoints which are meant for debugging, unstable, and subject to change without notice anyway. Inspired by #6679. The alternative is to move all relevant types to `eth2` or `types` instead - what do you think?
Partly addresses
- https://github.com/sigp/lighthouse/issues/6959
Use the `enable_light_client_server` field from the beacon chain config in the HTTP API. I think we can make this the single source of truth, as I think the network crate also has access to the beacon chain config.
N/A
2 changes:
1. Replace Option::map_or(true, ...) with is_none_or(...)
2. Remove unnecessary `Into::into` blocks where the type conversion is apparent from the types
Fix a regression introduced in this PR:
- https://github.com/sigp/lighthouse/pull/6361
We were indexing into the `MerkleTree` with raw generalized indices, which was incorrect and triggering `debug_assert` failures, as described here:
- https://github.com/sigp/lighthouse/issues/7005
- Convert `generalized_index` to the correct leaf index prior to proof generation.
- Add sanity checks on indices used in `BeaconState::generate_proof`.
- Remove debug asserts from `MerkleTree::generate_proof` in favour of actual errors. This would have caught the bug earlier.
- Refactor the EF tests so that the merkle validity tests are actually run. They were misconfigured in a way that resulted in them running silently with 0 test cases, and the `check_all_files_accessed.py` script still had an ignore that covered the test files, so this omission wasn't detected.
Update spec tests for recent v1.5.0-beta.2 release. There are no substantial changes for Electra and earlier, and the Fulu test updates to be made are tracked here:
- https://github.com/sigp/lighthouse/issues/6957
- Add `SingleAttestation` SSZ tests
- Add new `deposit_with_reorg` fork choice tests
- Update tag to v1.5.0-beta.2
- Ignore Fulu tests
A temporary workaround for the failing execution tests for geth.
https://github.com/sigp/lighthouse/actions/runs/13192297954
The test is broken due to the following breaking changes in geth that requires updating our tests:
1. removal of `personal` namespace in v1.14.12: See #30704
2. removal of `totalDifficulty` field from RPC in v1.14.11. See #30386.
Using an older version for now (` 1.14.10`) as we need to get things merged for the upcoming release.
Will create a separate issue to fix this.
Addresses #6706
This PR activates PeerDAS at the Fulu fork epoch instead of `EIP_7594_FORK_EPOCH`. This means we no longer support testing PeerDAS with Deneb / Electrs, as it's now part of a hard fork.
No substantial changes in v1.5.0-beta.1, this PR just updates the tests.
The optimisation described in this PR is already implemented in our single-pass epoch processing:
- https://github.com/ethereum/consensus-specs/pull/4081
* Refactor spec testing for features and simplify usage.
* Fix `SszStatic` tests for PeerDAS: exclude eip7594 test vectors when testing Electra types.
* Merge branch 'unstable' into refactor-ef-tests-features
* First pass
* Add restrictions to RuntimeVariableList api
* Use empty_uninitialized and fix warnings
* Fix some todos
* Merge branch 'unstable' into max-blobs-preset
* Fix take impl on RuntimeFixedList
* cleanup
* Fix test compilations
* Fix some more tests
* Fix test from unstable
* Merge branch 'unstable' into max-blobs-preset
* Merge remote-tracking branch 'origin/unstable' into max-blobs-preset
* Remove footgun function
* Minor simplifications
* Move from preset to config
* Fix typo
* Revert "Remove footgun function"
This reverts commit de01f923c7.
* Try fixing tests
* Thread through ChainSpec
* Fix release tests
* Move RuntimeFixedVector into module and rename
* Add test
* Remove empty RuntimeVarList awefullness
* Fix tests
* Simplify BlobSidecarListFromRoot
* Merge remote-tracking branch 'origin/unstable' into max-blobs-preset
* Bump quota to account for new target (6)
* Remove clone
* Fix issue from review
* Try to remove ugliness
* Merge branch 'unstable' into max-blobs-preset
* Fix max value
* Fix doctest
* Fix formatting
* Fix max check
* Delete hardcoded max_blobs_per_block in RPC limits
* Merge remote-tracking branch 'origin/unstable' into max-blobs-preset
* Fix partial withdrawals count
* Remove get_active_balance
* Remove queue_entire_balance_and_reset_validator
* Switch to compounding when consolidating with source==target
* Queue deposit requests and apply them during epoch processing
* Fix ef tests
* Clear todos
* Fix engine api formatting issues
* Merge branch 'unstable' into electra-alpha7
* Make add_validator_to_registry more in line with the spec
* Address some review comments
* Cleanup
* Update initialize_beacon_state_from_eth1
* Merge branch 'unstable' into electra-alpha7
* Fix rpc decoding for blobs by range/root
* Fix block hash computation
* Fix process_deposits bug
* Merge branch 'unstable' into electra-alpha7
* Fix topup deposit processing bug
* Update builder api for electra
* Refactor mock builder to separate functionality
* Merge branch 'unstable' into electra-alpha7
* Address review comments
* Use copied for reference rather than cloned
* Optimise and simplify PendingDepositsContext::new
* Merge remote-tracking branch 'origin/unstable' into electra-alpha7
* Fix processing of deposits with invalid signatures
* Remove redundant code in genesis init
* Revert "Refactor mock builder to separate functionality"
This reverts commit 6d10456912.
* Revert "Update builder api for electra"
This reverts commit c5c9aca6db.
* Simplify pre-activation sorting
* Fix stale validators used in upgrade_to_electra
* Merge branch 'unstable' into electra-alpha7
